Cottage Grove Rooftop Solar (10.56 kW).
24 all-black panels with a microinverter on every panel, a service upgrade with a fused line-side tap, and a passed city inspection. Installed by our own crew in June 2026, and filmed so you can see every step.
At a glance
How this one went together
This homeowner’s roof had room for a 24-panel array. Our crew laid out the array centered on the roof, chalked the rail lines and kept the fire-code setbacks clear before drilling anything. Every attachment went into a rafter with QuickBOLT mounts sealed at the penetration, and the IronRidge rails were staggered to spread the load across the roof.
Each panel has its own Enphase IQ8A microinverter, wired in three circuits of eight on 20 A breakers, with the trunk cable kept under tension and off the roof surface.
The electrical upgrade
At 10.56 kW the system was too big to backfeed through a breaker without exceeding the panel’s bus bar rating, so our electrician installed a fused line-side tap with a 60 A fused disconnect. A new 225 A panel went in outside, the old main panel became a sub-panel with grounds and neutrals separated, and every circuit was labeled. The system passed city inspection in July 2026.
Watch the full walkthrough
Want results like this on your roof?
Get a free design and quote from the same local crew.
